Hand-Held Zero Thrust Control Gun

Pressures to 20,000 psi

Model HGZT-20K Zero-Thrust Control GunPart #3102125005

1 Diffuser Tube Assembly
2 Easy Cartridge Overhaul
3 Tee Inlet 9/16” MP
4 Trigger Safety Latch
5 Adjustable Hand Grip

Designed for underwater or topside use where balance is critical. The equal forward and backward thrust allows the operator to be in balance. Constructed of stainless steel for corrosion resistance. Vertical inlet connection for underwater use. Adjustable hand grip. Features 60 second cartridge overhaul. Weighs only 16 Lbs. (7.26 Kg) 20 Kpsi (1379 Bar)

60 Second Cartridge Overhaul

stappen

STEP 1
Remove carridge adapter

STEP 2
Align lobe on cartridge assembly with groove in cartridge adapter and turn counter-clockwise to unlock and remove

STEP 3
Replace cartridge and install in block

Descripton	Part No.
20K Safety Shroud Assembly	77516030
20K Safety Shroud with Whip Hose Assembly	77516033-GDJB
SAFETY SHROUD ASSEMBLY, 20/40K	77516030
6 FT. WHIP HOSE (1” Type M Swivel \ 9/16” MP Tube Nipple)	77ST4113GDJB006
SAFETY SHROUD ADAPTER, 20/40K	77516029
20K Safety Shroud with Whip Hose Assembly	77516033-MM
SAFETY SHROUD ASSEMBLY, 20/40K	77516030
6 FT. WHIP HOSE (3/4” Type M Swivel \ 3/4” Type M Swivel)	77ST4008FDFD006
SAFETY SHROUD ADAPTER, 20/40K	77516029
20K Safety Shroud with Whip Hose Assembly	77516033-MW
SAFETY SHROUD ASSEMBLY, 20/40K	77516030
6 FT. WHIP HOSE (3/4” Type M Swivel \ 9/16” MP Tube Nipple)	77ST4008FDJB006
SAFETY SHROUD ADAPTER, 20/40K	77516029
20K Safety Shroud with Whip Hose Assembly	77516033-WW
SAFETY SHROUD ASSEMBLY, 20/40K	77516030
6 FT. WHIP HOSE (9/16” MP Tube Nipple \ 9/16” MP Tube Nipple)	77ST4008JBJB006
SAFETY SHROUD ADAPTER, 20/40K	77516029

1 Shroud Adapter
2 Safety Whip Hose
3 Safety Shroud
4 20K Quick Disconnect Coupling Assembly

Applications/Features:
Operator safety is the first consideration when waterblasting, the Gardner Denver 20K Safety Shroud is designed specifically for use with hand held control guns. These safety shrouds protect the operator from dangerous hose failures occurring near the gun. One should NEVER connect an unshrouded hose directly to a waterblasting gun. ALWAYS connect a whip hose and safety shroud to the gun first, then connect the appropriate hose to the other end of the shroud/whip hose with a quick coupling. The 20K Safety Shroud features a nitrile outer cover which is water, oil and soil resistant. The inner material consists of high strength braided stainless steel. The 20,000 psi shrouds also include a layer of woven KevlarTM for superior strength.
DOWNLOAD TECHNICAL INFORMATION